Rear Loader Garbage Truck

Operation steps: Before loading garbage, start the car and let the car run to 6 standard air pressure, and hang the power take-off device; after checking whether there is any leakage or abnormality in each part, follow the instructions of the operation knob to carry out grass work. step: 1....

Chat Now

Product Details

Vehicle


DONGFENG compactor garbage truck, LEFT HAND DRIVE

Overall dimensions

mm

10400x2500x3250

Garbage compactor

m3

18

GVW

kg

Appro × 25300

Curb weight


Appro × 15300

Loading weight


Appro × 10000

Wheel base

mm

4350+1300

Front/Rear overhang


1450/3300

Approach/departure angle

°

29/12

Front/Rear axles

kg

5000/10000/10000

Max speed

Km/h

90

Chassis Parameter

Cabin

Flat top cabin, a sleeper, no air conditioner, power steering.

Traction system

6×4

Engine

Brand: DONFGENG CUMMINS
Model: B210 33, 210hp
Type: diesel, 6 cylinder, turbocharged, inter-cooled.
Displacement: 5900ml
Emission standard: Euro III

Transmission

8-speed, manual

Tire model

10.00R20

No.of tires

10pcs and a spare tire


Operation steps: Before loading garbage, start the car and let the car run to 6 standard air pressure, and hang the power take-off device; after checking whether there is any leakage or abnormality in each part, follow the instructions of the operation knob to carry out grass work.

step:

1. Rotate the barrel (plate) operation knob to the left-down position to make the barrel (plate) mechanism down, release the knob to the neutral position, then rotate the scraper operation knob to the right to bring up the position, the scraper is retracted and released Rotate the knob back to the center to prepare to start the bucket.

2. Hang the trash can and rotate the barrel operation knob to the right-up position. The trash can turn upwards. The garbage is automatically discharged into the circular bucket body and the knob is released to the neutral position.

3, rotate the drum operation knob to the left down position, trash can back, release the knob back to the center; then rotate the slide operation knob to the left slide position, slide down (note: the scraper is in the upward position), release Rotate the knob back to the center to prepare for scraping.

4. Rotate the squeegee operation knob to the left scraping position. The squeegee scrapes rubbish along the arc bucket and releases the knob to the neutral position.

5. Rotate the slider to the upper right slide position (Note: The lower cylinder of the scraper must exceed the mark of the limit switch). The slide plate drives the scraper to slide at the same time. Release the knob to return to the neutral position. The garbage is picked up by the scraper and ready for advancement. Rubbish.

6. Rotate the negative pressure operation knob to the right to push out the position. Rubbish is pushed into the car by the negative pressure plate, and release the knob to the neutral position.

7. Rotate the negative pressure operation knob to the left to retract the position. The negative pressure plate will be retracted. Releasing the knob to the neutral position will complete the first garbage loading.

If garbage is reloaded, please continue to cycle from step 1-7 (rotate the squeegee operation knob to the receiving position and prepare to start tying the bucket); if it is not necessary to load again, rotate the tumbling operation knob to the right-up position to turn the bucket.

The mechanism is turned up, then the power take-off is released and the vehicle can be moved. Rotate the pusher operation knob to the right push position. Push the inside of the car to push the rubbish out of the car and loosen the knob to complete the dumping.


Hot Tags: rear loader garbage truck suppliers, rear loader garbage truck manufacturers, rear loader garbage truck for sale

Inquiry

Related Products