Road Vacuum Sweeper Machine

Before driving, check the following: Operation cabinet 1.The hand throttle is placed in the "small" position; 2.The high pressure three-way valve is set to the "backwater" position; Hydraulic system 1.Whether enough oil is injected in the tank; 2.The two stop valves under the...

Chat Now

Product Details

Model

HC-2050

Item name

Unit

Sweep width

2050mm

Work efficiency

16000 M2/H

Gradeability

0.35

Main brush length

890mm

Power source

48V

Continuous working hours

6-8H

Trash capacity

220L

Water tank capacity

100L

Side brush diameter

500mm

Drive power (motor)

2500W

Operating power (motor)

400+450W

Turning radius

1100mm

Size (L * W * H)

2480*2050*2150

Maximum working speed

7km/H

Maximum speed

9.8km/H

Filter area

7M2

N.w

970kg

Main Feature

1. Automatic dumping system configuration the four- way hydraulic valve, hydraulic workstations, hydraulic cylinders, two-way hydraulic locks, and so on;

2. Hydraulic dump system to improve work efficiency, fully automatic operation, safe and reliable;

3. Using 48V battery as the driving force, energy saving, continuous use of longer time;

4. The use of advanced filtration system, filter a large area, more scientific ability to filter, filter replacement easy;

5. Drive system on the set, increase the capacity of the trash;

6. Cab double door design, both sides of the door can be independent switch;

7. Car painting process, car tempered glass, vehicle elegant and beautiful.

8. This sweeping machine is mainly used for cold, harsh environment, widely used in roads, factories, schools, residential stations, terminal parks, etc.


Before driving, check the following:

Operation cabinet

1.The hand throttle is placed in the "small" position;

2.The high pressure three-way valve is set to the "backwater" position;

Hydraulic system 

1.Whether enough oil is injected in the tank; 

2.The two stop valves under the tank are opened;

Waterway System 

1.Whether the water tank is filled with clean water; 

2.Is the stop valve open? 

3.Is there any blockage on the filter; 

4.Check the amount of oil in the pump crankcase;


Key point: roll tube handle is placed in "stop" position; speed control knob is placed in "slow" position; pressure gauge switch is set in "closed" position; wash tube is placed in "closed" position; after confirming that the above items are in correct position After the engine is started, the pump on the transfer case is moved after the lever is engaged with the joystick, and the water pump can run at low speed;


Hot Tags: road vacuum sweeper machine suppliers, road vacuum sweeper machine manufacturers, road vacuum sweeper machine for sale

Inquiry

Related Products