High-pressure Street Cleaning Truck
1. high-pressure cleaning car to avoid oil increase only: daily maintenance of many drivers friends in order to be lazy, when you want to add oil, just add directly, do not put away the original oil, so the old and new oil mixed together, not only does not reach the best Lubrication conditions,...
Cleaning sewage truck
cleaning and suction for sewer, sewage tank, fecal tank
Filling factor of sewage
Sewage suction pump
High pressure water pump, 16MPa
Material & thickness
Q235, 5mm tank body
Q345, stainless teel
Max suction depth
sewage suction pipe
6 meters, 100mm diameter
Equipped truck chassis
Dongfeng, Foton, JAC, Yuejin, etc
single row, 3 seats
double row cab
4X4, Or RHD
Axle & wheel
2 axle, 6 wheels with a spare tire
Cmuins B190 3, 140kw/190hp, 6 cylinder, turbocharged intercooled
Sewage suction system
Vehicle vacuum pump
Import seal ring for hydraulic oil cylinder
Rear outlet valve
Hydraulic lifting dumping
Sewage suction pipe
One unit, 6 meters
One unit, vacuum valve
Oil and air separator
Water and air separator
Vacuum pressure meter
Water tank volume
High pressure water pump
hydraulic reel, 60 meters high pressure pipe
Sewage level window
Extra sewage pipe
1. high-pressure cleaning car to avoid oil increase only: daily maintenance of many drivers friends in order to be lazy, when you want to add oil, just add directly, do not put away the original oil, so the old and new oil mixed together, not only does not reach the best Lubrication conditions, and the damage to the machine is relatively large.
2. Check the working condition of the air compressor of the high pressure cleaning vehicle and the leak tightness of the pipeline. High-pressure air compressors have been used for a long time. There will be grease, carbon deposits, sediments, and rust on the inside. Regular inspections can eliminate problems in time.
3. Check the working condition of the radiator and the water pump of the high pressure cleaning vehicle. Look at whether the blinds work normally, whether the water pump leaks, and the shaft of the water pump is greased in time. If abnormalities are found, repair it in time.
4. When replacing the cylinder liner and piston with a high-pressure cleaner, pay attention to the size of the cylinder liner and the piston. If the cylinder with the largest size is equipped with the piston with the smallest size, the fitting gap will be too large, resulting in weak compression and difficulty in starting.
5. When installing the piston pin on the high-pressure cleaner, the piston should be thermally expanded. Because the piston and the piston pin are in an interference fit, the thick and uneven parts of the piston will have different degrees of thermal expansion and contraction, and the expansion will cause deformation after heating.